FAQ's

• How do I increase or reduce spring tensioning?
• Can hand crank reels be converted to motor driven reels?
• Can I adjust guide position on an enclosed 5000 or 7000 model reel?
• Can my spring driven reel be made "constant tension"?
• How do I replace the latch spring on my 7000 Series reel?
• How do I install a drive spring?
• How many GPM's will I get from my hose?
• What does the solenoid do and why might I need one?
• What type of switch do I need for my motor?

Problem Solving

• Air Pressure Or Fluid Flow Restricted
• Hose Will Not Retract
• Material Leaking From Swivel (Hex Nut)
• Reel Will Not Latch
• Slow Down the Speed of a Motor Driven Reel

Tech Bulletins (PDF's)

• Hand Crank to 4A & 6A Air Motors Requirements
• Hand Crank to 12V Electric Requirements
• Hand Crank to 24V Electric Requirements
• Hand Crank to Bevel Crank Requirements
• Hand Crank to Explosion Proof Motors Requirements
• Hand Crank to Explosion Proof Motors (400000) Requirements
• Hand Crank to Hydraulic Requirements
• Pressure drop / Flow Rate Charts & Graphs
• Material Compatibility Tables
• 4000 Constant Tension Requirements
• 5605 Constant Tension Requirements
• 7000 Constant Tension Requirements
• D80,000 Constant Tension Requirements
• 80,000 Constant Tension Requirements
• Series RT (formerly ReelTek) Information
• 600867 Speed Control Installation Instructions
• GFCI Dual Duplex Box and Cord Unit