7607 OLP – 3/8 in. x 70 ft. Heavy Duty Hose Reel
Reelcraft’s Series 7000 is very robust and ideal for the most demanding applications. The reel’s base and guide arm are formed from high-grade steel and engineered with structural forms and gussets to yield the greatest amount of strength. The basic reel without a hose can be used for air, water, or oil. Consult Reelcraft for other products and hoses. Guide arm adjusts to 7 positions.
- Reinforced steel – The steel guide arm and base are stamped with ribs and gussets to insure maximum strength and lightest possible weight.
- Full flow stress-free swivel design – The full flow swivel combines the highest grade seal design and materials with bearing areas to insure maximum service life. The hose is plumbed into the base to eliminate the risk of undue stress on the swivel.
- Quality finish and corrosion resistant – Individually powder coated components offer the maximum protection from premature corrosion.
*Reel is shipped in the top wind position. The reel image is shown in the side wind position.
Reel Specifications and Dimensions
Additional information
Weight | 40 lbs |
---|---|
Series | |
Hose I.D. | |
Hose O.D. | |
Hose Length | |
Pressure | |
Inlet | |
Reel Outlet | |
Hose Included | |
Max Temperature | |
UPC | 699567012238 |
A | 20.25" |
B | 19.75" |
C | 7.8125" |
D | 3.875" |
E | 7" |

Fluid Path Materials
Shaft Material | Steel |
FAQs
How do I increase or reduce spring tension?
Can my spring driven reel be made "constant tension"?
How do I replace the latch spring on my 7000 Series reel?
How do I install a new drive spring and set pre-turns?
How many GPM's will I get from my hose?
Can I adjust the guide opening position on an enclosed model hose reel?